Baader Planetarium Guidescope Rings - BP I/II/III (2pc)

Baader Planetarium Guidescope Rings - BP I/II/III (2pc)Massive, solid, turned aluminium rings, width 28 mm, support surface with photo threaded connection 1 4 "and additionally 2 through holes 5 mm diameter. 3 adjusting screws (M10) with 10mm , ball bearing bearing surface made of V2A steel, covered with a hard rubber sheath (i. e. the screw pressure surface does not rotate during the adjustment of the telescope!). The guiding telescope is absolutely solid, non slip and will not be scratched! A further

it has the characteristics of a larger full well depth and no amp glow

Low periodic error (<0

1X USB input for mount

The Highlights of the Baader Fringe Killer Color Correction Filter

Vixen or Losmandy plates above the rings to increase the rigidity of the mechanical system and enable to install other accessories

The larger sensor size and higher resolution compared with ASI662MC result in sharper images for a better astrophotography experience

a range of resources for further study

included adapter with all 1

It has performed well on RASA

5") Focal Ratio: f/5 Focal Length of Eyepiece 1: 25mm (0

4 G Working Temperature 0~40 °C (Recommended) Mount Type Alt-azimuth Slew Rate 20 X-1440 X Zero Position Mechanical Battery Capacity 6000 mAh Connection Port 3/8"-20" Net Weight 2

CNC machined Exterior Finish Anodized red/black Latitude adjustment range 0° ~ 60° (special CW shaft mounting if <10°) Azimuth adjustment range ± 6° Tracking accuracy (PE)** <±7 arcsec PEC PPEC Period 400 sec Worm diameter Φ17mm