PSM XE10 IS300 / JZS16X GS Rear Toe Rods

PSM XE10 IS300 / JZS16X GS Rear Toe RodsParts Shop Max XE10 IS300 JZS16X GS Rear Toe Rods Listing is for: 1x Pair of rear toe arms Pair of CNC 6061 billet aluminum toe arms with copper anodizing ~CrMo Taper ~Low torque PTFE lined maintenance free bearings & Clamping adjustment **These toe rods are slightly longer than to reduce toe gain. If stock eccentric bolts are used, set them to the max inboard setting for these toe rods to achieve proper toe alignment. Use our eccentric lockouts for

-Aluminum clevis can be removed to attach to aftermarket swaybars and arms as well

C5 Corvette Hand Brake bolt on base structure

Weld-in installation

Sabelt seat design was simple and elegant

The drop-in fuel pump hanger with integrated surge tank provides this functionality featuring:

These 298mm long tie rods are 27mm longer than OEM S14 inner tie rods

These knuckles have 25mm Roll center correction / drop

and nearly every other parts combination on earth * With exception of an S13 with long coil over springs

1x AN Fitting

230mm m52p1

These will not go low unless paired with our drop knuckles

Recommended to weld in small increments