Ap Racing Brake Bias Valve Lever Type

Ap Racing Brake Bias Valve Lever TypeThis lever type proportioning valve provides the driver with 7 distinct settings from which to produce the most suitable braking ratio. To obtain the best performance using this valve, the brake balance should be biased towards the rear so that with the valve piped in to the rear line and set in position 7 where virtually no reductions occurs, the balance is as much to the rear as will ever be needed. Moving the control lever to a lower setting will

a useful addition

Whether you are looking for master cylinders

Airflow 1590 m3/hour at 0 mm water static pressure - Current draw 7

Power Cool 180° contains no water eliminating the problems caused by water based coolants

protects vulnerable parts from heat damage

WEIGHT - 1

5 x Tube Mount Clips

This makes the products especially well-suited to rural and off-road applications

9 capable of being used as a universal sensor for lambda 1 measurement as well as for other lambda ranges

Alternate 12v Power supply for the WRC and Trophy intercom systems

It is equipped with a LED status diode for fast diagnostic and a 120 Ohm terminator that can be switched on or off to relieve the user from applying external terminators

Supplied with