Counter Electrode Holder - membrane separation, 6 mm dia. electrodes

Counter Electrode Holder - membrane separation, 6 mm dia. electrodesThe counter electrode holder is used for holding a cylindrical electrode with diameter of 6 mm. It enables installation of a classical electrode in tanks of larger volumes. Moreover, it holds an ion exchange or nanoporous membrane to separate the counter electrode from the working electrode environment. The nominal aperture (active membrane surface area) is 1cm2, but other value can be provided on request. The immersion (installation tube) has the

Vitrification temperature: -18°C

porosities and numbers of pores are available on demand

Film:  SiC Epi film with 3C structure grown by PECVD

You may need a KFD25 angle valve before connecting the vacuum port to the vacuum pump

71 Array (Capacity):  14*15=200

[DOL:DME =1:1

n-type Si doped

Orientaion: <110> ±2°

Click the video below to see how to heat sealing the tab onto pouch cell case after the welding:

spacers are needed to obtain the desired pressure

07 up to 380 ml per minute via Silicone or Viton™/Fluran™ F-5500-A (aqueous electrolyte) or PharMed™ (organic electrolyte) internal tubing

One or both sides of Si substrate can be illuminated during the process by an external lamp (typically halogen or LED