M8 X 1.25 BAER TAP SET -

M8 X 1.25 BAER TAP SET -Product information BAER HSSG Hand Tap Set (3pcs.) M 8 x 1. 25 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.

With this BaerCoil® thread repair-set it is possible to repair through hole threads and blind hole threads in MF 13 x 1

Light metal alloys (tensile strength above 350 N/mm²): 15

BaerFix Thread Inserts with cutting holes M 6 x 1

inside thread: UNF 7/16 x 20

1/2" Nominal diameter in inches 1

5 x B7355-15: BaerCoil thread inserts M 30 x 2

Copper-tin alloy (bronze) short-chipping 2

The nominal diameter at UNC 1

26 mm Thread length calculation 1

BaerCoil HSSG Short Machine Tap G (BSP) 1/8 x 28 STI (oversized for wire thread inserts)

1 x B3072-1: BaerCoil HSSG single-cut tap M 8 x 0

8 EBW05 BZ005 5