M20 X 2.5 HAND TAP SET - 262736601 (P20)

M20 X 2.5 HAND TAP SET - 262736601 (P20)Product information BAER HSSG Hand Tap Set (3pcs.) M 20 x 2. 5 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.

The holes between the cutting edges take up the chips

It is also suitable for case-hardening steels and unalloyed tempering steels with a strength of up to 750 N/mm²

The Five Basic Functions:

With this BaerCoil® thread repair set it is possible to repair spark plug threads or glow plug threads in MF 10 x 1

283 '' P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 0

Rmin (cast iron): 4

5 mm Length 184 mm Machine mount cylindrical shank (⌀ 13 mm)

without tip) 19

penetrates stuck or jammed parts

To assist with the repair

Diameter 16

73 Pitch 28 Pitch in mm 0