M12 x 1.75 HAND TAP SET - 262735001 (P19)

M12 x 1.75 HAND TAP SET - 262735001 (P19)BAER HSSG Hand Tap Set (3pcs.) M 12 x 1. 75 The hand tap set consists of three taps and allows you to cut a finished thread with significantly reduced risk of breakage. The advantage of three piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre cutting and

00 mm Pre-drilling diameter Light metal alloys (tensile strength below 250 N/mm²): 12

85 mm Height H 18 mm Outside diameter D1 65 mm Dimension Diameter D MF 30 x 1

The Faithfull 15 litre plastic paint scuttle that can be used with all types of paint and wallpaper paste

The nominal diameter for G (BSP) 1" is approx

Taper tap (No

brass and aluminium

They significantly save material and contribute to the conservation of resources

The nominal diameter at UNC 1" is approx

drilling depth for through hole: 10

5 D T (Length when installed) 25 mm Thread length calculation 2

1 mm Height H 22 mm Wrench size S 50 mm Dimension Diameter D NPT 3/4 x 14 Diameter 3/4

inside thread: UNC 1/2 x 13