M6 X 1.0 BAERFIX CUTTING HOLE STST (1-FAL06)

M6 X 1.0 BAERFIX CUTTING HOLE STST (1-FAL06)BaerFix Thread Inserts with cutting holes M 6 x 1. 0 8 mm 1. 4305 100 pcs. BaerFix thread inserts with three tapping holes are self tapping and guarantee a permanent fixed thread connection in your workpiece and are extremely easy to handle. Simply screw them into the hole you cut the holding thread yourself. If your thread is worn or torn out, a stable material connection is no longer possible. This is where the BaerFix self tapping thread insert

Diameter 6 Length 1

75 mm - 17

5 times 15 mm=22

5 times 15

5 D T (Length when installed) 24 mm Thread length calculation 1

BAER die stocks are manufactured according to DIN 225 and convince by their easy handling

Cast iron(Brinel hardness 150 - 200 HB): 6

With this BaerCoil® thread repair-set it is possible to repair through hole threads and blind hole threads in M 4 x 0

00 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface

Tensile strength at room temperature

You can tighten these screws with the enclosed screwdriver

139 '' P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface B (thread depth with chamfer) 0