M16 X 2.0 BAERCOIL® TAP (B3033)

M16 X 2.0 BAERCOIL® TAP (B3033)Product information BaerCoil HSSG Short Machine Tap M 16 x 2. 0 STI (oversized for wire thread inserts) BaerCoil screw tap are mainly used for thread repair or thread reinforcement in connection with wire thread inserts. With this BaerCoil short machine tap, a finished thread with oversize can be cut in one operation as a holding thread for wire thread inserts of dimension M 16 x 2. 0. Precise internal thread can thus be cut time savingly by hand or

outside diameter of thread insert) 4

Care must be taken not to turn the insert against the direction of rotation as this may cause the spigot to break off

tang breaker and wire thread inserts made of stainless steel

low-alloyed copper and short-chipping copper-tin alloys

) UNC 1/4 x 20 - LEFT

With this BaerCoil® thread repair set it is possible to repair through hole threads and blind hole threads in M 7 x 1

Its semi-enclosed case allows fast rewind and helps to prevent damage to the cable when in transit or storage

Diameter: 6

bronze (tensile strength above 350 N/mm²): 6

Diameter 18

8 STI (oversized for wire thread inserts) - ECO for blind holes

Diameter    30