(BSPT) 1/2 x 14 BAER HSSG Short Machine Tap Form C - RC

(BSPT) 1/2 x 14 BAER HSSG Short Machine Tap Form C - RCBAER HSSG Short Machine Tap Form C RC (BSPT) 1 2 x 14 Short machine taps allow you to cut a finished thread with just one tool in one step, even by hand. Exact internal thread can be cut by hand or semi professionally by machine to save time. Compared to the machine tap, the short machine tap has a short shank. This allows you to cut internal thread by hand without jamming and can be operated with tap wrenches, tool ratchets or other holding tools

5 D T (Length when installed) 12 mm P (depth) The thread insert must sit 1/4 - 1/2 turns below the surface

Gearboxes and differentials

Undersize- tolerance: for studs that receive a surface treatment or galvanic protective layer up to approx

45 mm - 10

Diameter 1/2 Pitch 13 Dimension UNC 1/2 x 13 Length 1

) MF 16 x 1

25 Diameter 12

bronze (tensile strength above 350 N/mm²): 9

794 Dimension UNF No

62 mm Height H 11 mm Wrench size S 27 mm Dimension Diameter D G (BSP) 1/8 x 28 Diameter 1/8

without tip) 25

L2 = 13 mm